GEYSER WISE INSTALLATION VEREENIGING AND MEYERTON
Express Drains and Plumbing is a accredited Geyserwise installer in Vereeniging, Meyerton Vaal area. Geyserwise is the easiest and most affordable way to save money on your water heating cost. Geyserwise not only saves you money, but also gives you a tool to control & monitor the geyser which is usually tucked away in your roof.
Geyserwise
For use in pumped solar water heating systems
Description
Use as a geyser timer
Clear display of water temperature, time, day, heating mode and malfunction conditions.
Auto or manual heating.
Easy temperature setting to your requirements (30 - 65°C) factory default is 55°C.
Four different temperature settings.
Daily programmable timer with four time settings.
Error conditions alert by warning code E1 to E7.
Electronic thermostat with mechanical thermal cut-out at 90°C.
CONTACT 078 314 7309
FOR MORE INFO
CONTACT 078 314 7309
FOR MORE INFO
Use as timer on a thermosyphon solar system
Clear display of water temperature, time, day, heating mode and malfunction conditions on solar system and geyser.
Auto or manual heating.
Easy temperature setting to your requirements (30 – 65°C) factory default is 55°C.
Four different temperature settings.
Daily programmable timer with four time settings.
Error conditions alert by warning code E1 to E7.
Electronic thermostat with mechanical thermal cut-out at 90°C. Please note the cut-out temperature for solar systems expected to reach temperatures above this temperature.
Use as timer and differential control on pumped solar system
Clear display of water temperature, time, day, heating mode and malfunction conditions on solar system and geyser.
Auto or manual heating.
Easy temperature setting to your requirements (30 – 65°C) factory default is 55°C.
Four different temperature settings.
Daily programmable timer with four time settings.
Error conditions alert by warning code E1 to E9.
Electronic thermostat with mechanical thermal cut-out at 90°C. Please note the cut-out temperature for systems expected to reach temperatures above this temperature.
Differential controller 12V and 220V systems.
Technical Parameters
Operating voltage 230VAC / 50HZ.
Main Relay contact rating 30AMP (Max 4KW).
Secondary relays pump and solenoid 5Amp.
Operating voltage range 160V – 250V AC.
Earth leakage protection at 25MA action time = 0,1 second.
Temperature display range 0 - 99°C (“-5” when below -5°C “EA” when above 99°C).
High temperature warning above 84°C.
Temperature setting ranges 30 - 65°C (heating water electrically).
Heat failure – when increase at a rate of less than 4°C per hour.
Electronic thermostat with mechanical thermal cut-out at 90°C.
Dry heat detection – empty cylinder.
Temperature tolerance ± 2%.
Temperature differential setting 1°C.
Switching differential 6°C.
2nd temperature probe for solar.
Solar differential 7°C.
Temperature probe failure detection for both collector and tank.
Temperature probe range for geyser is -30 to + 130°C.
Isolate both L + N when in off state.
Collector antifreeze protection at 5°C
how to set the system:
WATCH VIDEO WITH SETTINGS
Get A Free Consultation & Estimate
Fill in the form below with your message and we will respond shortly